Installation Video Library
The video library below includes demonstrations for the proper installation of our standing seam roof system and Kirby products. Click on any image below to view a video.
Eave Plate
The Eave Plate is the fixation point for a standing seam roof system. This video demonstrates proper installation and orientation with the secondary steel.
Rake Support Angle
The Rake Support Angle supports and allows expansion & contraction of roof panels. This video details proper installation and considerations for rake clip placement.
Starter Panel
Proper starter panel installation is key to the integrity of your roof system. This video demonstrates how to locate the panel dimensions on drawings and ensure the panel is sealed & fastened correctly to the rake support angle.
Outside Closure
The outside closure is integral to the weathertightness of your roof system. This video details how to notch each panel for proper fit, as well as mastic tips and fastener requirements.
On-Slope Gutter
Hanging gutters involves correct bracket location, crimping, mastic, and fasteners. This video walks you through this process to ensure a secure and well-functioning gutter.
Rake Trim
Bird stops, corner prep, mastic, and allowance for adequate panel movement are as important to Rake Trim installation as the aesthetics. This video demonstrates this key step.
End Laps
The roof panel end lap is the transition between an upper and lower roof panel. This video provides guidance for installing the components of a trapezoidal roof panel end lap.
High Eave to Parapet
The high-eave parapet detail is the transition between roof panels and parapet wall panels or wall panels above the roof. This video demonstrates the proper installation where trapezoidal roof panels meet wall panels.
Rake Parapet
The rake parapet trim is used to transition from trapezoidal roof panel to wall panel above at a rake condition. This video focuses on the proper installation of the various components.
Pipe Penetrations
Pipe boots are used when vent stacks or other pipes penetrate the roof panel. This video shows the installation of a pipe boot and the steps to properly seal it to the roof panel.
Panel Modularity
This video is a basic guide to maintaining panel modulation with a standing seam roof panel. Roof clip installation and methods for maintaining panel modulation are presented.
Eave Closure
This video demonstrates the low eave portion of the basic installation detail for trapezoidal roof panels. Installation of the inside closures and securing the roof panel to the eave plate are discussed.